QUESTION: 1
A Dell EMC NetWorker Module for Microsoft VSS-based recovery of a Microsoft SQL AlwaysOn
Availability Group must be performed. What is the first step a database administrator must complete
prior to recovering the database?
A. Suspend the replication process between the primary and secondary replicas
B. Delete the secondary database on the secondary replica server
C. Remove the target database from the Availability Group
D. Start the recovery process using the native tools in SQL Server Management Studio
Answer: D
QUESTION: 2
A Dell EMC administrator is configuring a new SAP with Oracle environment What is a consideration
when configuring backups using NMSAP?
A. Restartable backups are not supported
B. SAP and Oracle must be deployed on physical servers
C. Probe-based backups are supported
D. Only offline Oracle database backups are supported
Answer: C
Reference:
https://www.emc.com/collateral/TechnicalDocument/docu81618.pdf
QUESTION: 3
A Dell EMC NetWorker administrator notices that the NetWorker backups to a Data Domain system
are not completing within the backup window Which best practice can be implemented to improve
performance?
A. Start with 32 save streams per drive and tune by decreasing and monitoring performance
B. Distribute the backup start times throughout the backup window to balance the load
C. Disable Client Direct to ensure the backup goes through the storage node
D. Start the backup start times as close together as possible to complete early in the backup window
Answer: B
QUESTION: 4
A Dell EMC NetWorker customer has Microsoft Windows 2012 R2 Hyper-V clustered servers They
plan to back up the VMs in Hyper-V using NMM What is an NMM backup requirement for this
environment?
A. Only non-federated backups are supported for Windows server Hyper-V CSV
B. Disable incremental backups and enable only full backups
C. Forever incremental backups must be used for AFTD devices
D. Use NetWorker BBB to create consistent point-in-time snapshots
Answer: B
Reference:
https://www.emc.com/collateral/TechnicalDocument/docu81466.pdf
QUESTION: 5
A Dell EMC NetWorker administrator wants to configure a Microsoft Exchange DAG backup for their
environment. Which action should occur to create a user and assign the required privileges?
A. Manually create the user and only assign the Exchange Admin privilege
B. Use the NetWorker Management Console
C. Manually create the user and only assign the Security group membership on the domain controller
D. Use the NMM Exchange Admin Configuration Tool
Languages: English
Starting on May 1, 2019, you only need to pass Exam AZ-103 to earn this
certification. This new exam combines the skills covered in AZ-100 and AZ-101
(which retired on May 1, 2019), with the majority of the new exam coming from
AZ-100. This exam measures your ability to accomplish the following technical
tasks: manage Azure subscriptions and resources; implement and manage storage;
deploy and manage virtual machines (VMs); configure and manage virtual networks;
and manage identities.
Manage Azure subscriptions and resources (15-20%)
Manage Azure subscriptions assign administrator permissions
configure cost center quotas and tagging
configure Azure subscription policies at Azure subscription level
Analyze resource utilization and consumption configure diagnostic settings on resources
create baseline for resources
create and rest alerts
analyze alerts across subscription
analyze metrics across subscription
create action groups
monitor for unused resources
monitor spend
report on spend
utilize Log Search query functions
view alerts in Log Analytics
Manage resource groups
use Azure policies for resource groups
configure resource locks
configure resource policies
identify auditing requirements
implement and set tagging on resource groups
move resources across resource groups
remove resource groups
Managed role based access control (RBAC)
create a custom role
configure access to Azure resources by assigning roles
configure management access to Azure, troubleshoot RBAC, implement RBAC
policies, assign RBAC Roles
Implement and manage storage (15-20%)
Create and configure storage accounts configure network access to the storage account
create and configure storage account
generate shared access signature
install and use Azure Storage Explorer
manage access keys
monitor activity log by using Log Analytics
implement Azure storage replication
Import and export data to Azure
create export from Azure job
create import into Azure job
Use Azure Data Box
configure and use Azure blob storage
configure Azure content delivery network (CDN) endpoints
Configure Azure files create Azure file share
create Azure File Sync service
create Azure sync group
troubleshoot Azure File Sync
Implement Azure backup
configure and review backup reports
perform backup operation
create Recovery Services Vault
create and configure backup policy
perform a restore operation
Deploy and manage virtual machines (VMs) (15-20%)
Create and configure a VM for Windows and Linux configure high availability
configure monitoring, networking, storage, and virtual machine size
deploy and configure scale sets
Automate deployment of VMs modify Azure Resource Manager (ARM) template
configure location of new VMs
configure VHD template
deploy from template
save a deployment as an ARM template
deploy Windows and Linux VMs
Manage Azure VM
add data discs
add network interfaces
automate configuration management by using PowerShell Desired State
Configuration (DSC) and VM Agent by using custom script extensions
manage VM sizes; move VMs from one resource group to another
redeploy VMs
Manage VM backups
configure VM backup
define backup policies
implement backup policies
perform VM restore
Azure Site Recovery
Configure and manage virtual networks (30-35%)
Create connectivity between virtual networks create and configure VNET peering
create and configure VNET to VNET
verify virtual network connectivity
create virtual network gateway
Implement and manage virtual networking configure private and public IP addresses, network routes, network
interface, subnets, and virtual network
Configure name resolution configure Azure DNS
configure custom DNS settings
configure private and public DNS zones
Create and configure a Network Security Group (NSG) create security rules
associate NSG to a subnet or network interface
identify required ports
evaluate effective security rules
Integrate on premises network with Azure virtual network create and configure Azure VPN Gateway, create and configure site to site
VPN, configure Express Route, verify on premises connectivity, troubleshoot on
premises connectivity with Azure
Manage identities (15-20%)
Manage Azure Active Directory (AD) add custom domains
Azure AD Join
configure self-service password reset
manage multiple directories
Manage Azure AD objects (users, groups, and devices) create users and groups
manage user and group properties
manage device settings
perform bulk user updates
manage guest accounts
Implement and manage hybrid identities
install Azure AD Connect, including password hash and pass-through
synchronization
use Azure AD Connect to configure federation with on-premises Active Directory
Domain Services (AD DS)
manage Azure AD Connect
manage password sync and password writeback
Implement multi-factor authentication (MFA)
configure user accounts for MFA, enable MFA by using bulk update, configure
fraud alerts, configure bypass options, configure Trusted IPs, configure
verification methods
Question: 1 You have an Azure subscription that contains 10 virtual machines.
You need to ensure that you receive an email message when any virtual machines
are powered off, restarted, or deallocated.
What is the minimum number of rules and action groups that you require?
A. three rules and three action groups
B. one rule and one action group
C. three rules and one action group
D. one rule and three action groups
Answer: C
Question: 3 You have 100 Azure subscriptions. All the subscriptions are associated to
the same Azure Active
Directory (Azure AD) tenant named contoso.com.
You are a global administrator.
You plan to create a report that lists all the resources across all the
subscriptions.
You need to ensure that you can view all the resources in all the subscriptions.
What should you do?
A. From the Azure portal, modify the profile settings of your account.
B. From Windows PowerShell, run the Add-AzureADAdministrativeUnitMember cmdlet.
C. From Windows PowerShell, run the New-AzureADUserAppRoleAssignment cmdlet.
D. From the Azure portal, modify the properties of the Azure AD tenant.
Answer: C
Question: 4 Note: This question is part of a series of questions that present the same
scenario. Each
question in the series contains a unique solution that might meet the stated
goals. Some
question sets might have more than one correct solution, while others might not
have a correct solution.
After you answer a question in this section, you will NOT be able to return to
it. As a result,
these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a
resource group
named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the Subscriptions blade, you select the subscription, and then
click Programmatic deployment.
Does this meet the goal?
A. Yes
B. No
Answer: B
Question: 5 Note: This question is part of a series of questions that present the same
scenario. Each
question in the series contains a unique solution that might meet the stated
goals. Some
question sets might have more than one correct solution, while others might not
have a correct solution.
After you answer a question in this section, you will NOT be able to return to
it. As a result,
these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a
resource group
named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the RG1 blade, you click Deployments.
Does this meet the goal?
A. Yes
B. No
Answer: A
Question: 6 Note: This question is part of a series of questions that present the same
scenario. Each
question in the series contains a unique solution that might meet the stated
goals. Some
question sets might have more than one correct solution, while others might not
have a correct solution.
After you answer a question in this section, you will NOT be able to return to
it. As a result,
these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a
resource group
named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the Subscriptions blade, you select the subscription, and then
click Resource providers.
Does this meet the goal?
Implement and test the production control module identify components of unified manufacturing
validate the interconnectivity between General ledger and the Production control
modules
implement parameters, production orders, and life cycle
implement and manage subcontractors
configure and manage costing sheets
implement and manage work calendars
configure inventory dimensions in production
implement and manage resources
create and manage operations and routes
Configure and manage a product configuration model build a product configuration model
create and manage products
configure and manage constraints
describe the purpose and capabilities of the product configuration models
Create and manage production and lean orders (25-30%)
Create common components of production and lean orders create and configure catch weight items
create production flows
create and manage Kanbans
create and manage formulas
create and process batch, production, and lean orders
set up and maintain commodity pricing
apply product compliance standards
identify items and substitute items within a bill of material (BOM) or formula
Manage scheduling and subcontracting perform processes to manage scrap and waste of a discrete order
implement production scheduling and subcontracting
implement activity-based subcontracting
create and maintain project items and item tasks
Create, process, and manage production batch orders (40-45%)
Perform production batch order lifecycle process production batch orders
implement containerized packaging
implement and configure rebates
implement lot and batch control processes
create planned production batch orders by using the Master planning module
perform processes to manage scrap and waste of a batch order
perform a batch rework
configure batch reservations and expiration dates
identify and configure batch attributes for processes
integrate manufacturing processes with warehouse management system (WMS)
Manage and maintain formulas
create and manage co-products and by-products
create and manage planning items
create and manage formulas with scalable and percentage-based calculations
create and manage formulas with co-products, by-products, and planning items
Configure and manage manufacturing executions identify the capabilities and limitations of the manufacturing executions
module
identify the responsibilities of the security role managing the production
processes
process production orders
process lean orders by using Kanban boards
identify the process workflows for managing a production environment
Create and manage products
create a product and product variants
create Bill of materials (BOMs)
identify the purpose and capabilities of the Product Configuration models
create and configure category hierarchies
create product attributes
Configure products for Supply Chain management
create and manage inventory dimensions
create Item groups and Item model groups
create and print product labels
create and assign bar codes
configure Item coverage
configure product compliance processes
Implement Inventory management (20-25%)
Configure inventory management
identify the purpose of inventory forecasting
set up inventory and warehouse parameters
configure and perform Quality control and Quality management processes
configure inventory valuation reports
configure ABC classification
configure inventory closing components
implement inventory breakdowns
Manage and process inventory activities
create and process inventory and warehouse journals
create and process transfer orders
create and process chain orders
manage direct delivery orders
process quarantine orders
process quality orders
perform inventory closing and adjustments
apply inventory blocking
Implement and manage Supply Chain processes (25-30%)
Implement Procurement and sourcing
create and manage purchase requisitions, requests for quotes (RFQs), and
purchase orders (POs)
create and manage catalogs
configure purchase order change management
configure and apply Vendor rebates
implement and manage consignment inventory
configure and test Vendor collaboration portal
manage over and under deliveries and delivery schedules
Implement common Sales and marketing features configure quotations, sales orders, and return orders
configure sales groups and commissions
configure and manage up-sell, cross-sell, discounts, and price groups
configure customer and prospect searches
implement and manage leads and prospects
configure inter-company Trade relations
Implement advanced sales and marketing features configure brokers and royalties
configure trade allowances and customer rebates
implement and process foreign trade
configure and process Vendor 1099
Implement Warehouse management and Transportation management and perform
business processes (25-30%)
Configure Warehouse management
implement components for warehouse management
implement directives
implement inventory statuses
implement waves
implement loads
implement shipments
implement works
implement mobile devices
Perform warehouse management processes
identify inventory movement processes
perform cycle counting
use mobile devices for inbound and outbound processes
implement containerization and packaging
process inbound orders
process outbound orders
perform cluster picking
process shipments
identify and apply the replenishment process
Implement transportation management and perform business processes configure container management
configure and manage transportation management
perform planning and executing of loads and shipments
configure and generate freight bills and invoices
identify and configure route and rate engines
configure and use dock appointment scheduling
perform transportation processes by using the load planning workbench
