Category Archives: NetApp

NetApp

NS0-526 NetApp Certified Implementation Engineer – Data Protection Exam

The following resources were used in the development of the NS0-527 exam.

NetApp Interoperability Matrix Tool (IMT)
TR-4598: Fabric Pool Best Practices
Commvault Complete Backup and Recovery V11.20 Documentation
TR-4286: Antivirus Solution Guide for Clustered Data ONTAP
VEEAM Backup and Replication 11: User Guide for VMware vSphere
Cluster and SVM Peering Overview
OnCommand Workflow Automation 5.0 Release Notes
SnapManager 3.4.2 for Oracle – UNIX
SnapCenter Software 4.4 Installation and Administration Guide
TR-4517: ONTAP Select on VMware
TR-4733: SnapMirror Synchronous for ONTAP
NetApp Encryption Overview
TR-3450: High-Availability (HA) Pair Controller Configuration Overview and Best Practices
The NetApp Solution for Ransomware
SnapCenter 4.4 Quick Reference Guide
TR-4773: NetApp Converged Infrastructure with Veeam Backup & Replication
ONTAP REST API Guide
TR-4015: SnapMirror Configuration and Best Practices Guide for ONTAP 9
TR-4832 – Three-Data-Center Disaster Recover Using NetApp SnapMirror for ONTAP 9.7
SnapCenter Plug-in for VMware vSphere documentation
NetApp MetroCluster: TR-4705
TR-4878: SnapMirror Business Continuity (SM-BC) for ONTAP 9.8
TR-4689 MetroCluster IP Solution Architecture and Design
Disks and Aggregates Overview
Microsoft technical documentation – Docs.microsoft.com
TR-4569: Security Hardening Guide for NetApp ONTAP 9
NetApp Cloud Volumes Service for Google Cloud Documentation
TR-4678: Data Protection and Backup – NetApp FlexGroup Volumes
Administration Guide for UNIX

QUESTION 1
Your manager requires you to protect a production SVM called svm01 by using SVM-DR. Your manager
insists that all configuration and data LUNs be replicated to the DR cluster. The destination SVM should be
called drsvm01. You set up an SVM-DR relationship between the clusters, specifying that the – identitypreserve
option is set to true. After the initial replication completes, you discover that the iSCSI LIF
configuration has not been replicated to drsvm01.

What should you do to solve this problem?
A. Run the relationship a second time and check the configuration again.
B. Manually create and configure the iSCSI LIFs on drsvm01.
C. Set up a new relationship without using the -identity-preserve option.
D. Add the FC protocol to the destination and configure the FC LIFs.

Correct Answer: C

QUESTION 2
You are the administrator of your company’s ONTAP clusters. You are asked to provide a disaster recovery
solution between your primary AFF A400 cluster and your FAS2720 cluster with the highest possible
availability at the lowest possible price.
In this scenario, which product will satisfy this requirement?

A. MetroCluster
B. SM-S
C. SnapMirror
D. SVM-DR

Correct Answer: A

QUESTION 3
You experience a node outage as a result of a component failure in a high-availability (HA) pair. You replace
the failed component and get the node booted up again, but are unable to perform the giveback operation.
The onscreen error is:
“Connected to partner, Takeover is not possible: Storage failover mailbox disk state is invalid, Local node has
encountered errors while reading the storage failover partner’s mailbox disks. Local node missing partner disks”
What are two ways to solve this problem? (Choose two.)

A. Correct the shelf cabling errors.
B. Destroy the root aggregate.
C. Correct the failover group configuration.
D. Destroy the mailboxes on both nodes.

Correct Answer: A,C

Examkingdom NetApp NS0-526 Exam Brain dump pdf, Certkingdom NetApp NS0-526 Brain Dumps PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-526 Certification, NetApp NS0-526 Brain Dumps Training at certkingdom.com

NetApp

NS0-175 Cisco and NetApp FlexPod Design Exam

Cisco and NetApp FlexPod certification
You are proficient in designing and installing FlexPod® solutions for a variety of business workloads. FlexPod solutions speed the deployment of infrastructure and business-critical applications while reducing cost, complexity, and risk.

NetApp offers two Cisco® and NetApp® FlexPod certifications: FlexPod Design Specialist and FlexPod Implementation and Administration Specialist.

FlexPod logos and certificates will be granted to those individuals who successfully pass either of the following:

Cisco and NetApp FlexPod Design (NS0-175) certification exam.
Cisco and NetApp FlexPod Implementation and Administration (NS0-176) certification exam.

Prepare for your exam
Candidates for FlexPod® certification should have at least six to 12 months of field experience working with the tools and standards for assessing FlexPod computing solution performance characteristics and requirements. They should also understand the hardware components associated with the Cisco® and NetApp® FlexPod solution and the process for selecting proper hardware for a given set of requirements.

NS0-175 Cisco and NetApp FlexPod Design Specialist

Recommended Training and Resources:
FlexPod Fundamentals
Technical Positioning of FlexPod Solutions
NS0-175 practice test
View exam topics
Register for your exam

Take your exam
NS0-175 exam includes 60 test questions, with an allotted time of 90 minutes to complete. In countries where English is not the native language, candidates will be granted a 30-minute extension to the allotted examination completion time.

The NS0-175 exam covers the following topics:

Flexpod Design
Describe FlexPod components based upon customer workloads
Describe how to size a solution based on customer requirements in accordance with FlexPod best practices
Describe the support options for FlexPod

Networking
Describe Cisco networking components used within FlexPod designs
Demonstrate knowledge of FlexPod networking configurations

Security
Describe access control methods for FlexPod solutions
Describe the considerations in building a secure multitenancy design

Tools
Describe resources for determining supported FlexPod components
Demonstrate knowledge of using tools for managing FlexPod
Demonstrate knowledge of troubleshooting methodologies for FlexPod solutions

QUESTION 1
You are sizing a FlexPod Datacenter solution for multitenancy use.
What are two important platform scaling considerations in this scenario? (Choose two.)

A. maximum NetApp ONTAP cluster limits
B. maximum NetApp ONTAP storage VM limits
C. maximum Cisco vPC interfaces between Fabric Interconnects
D. maximum Cisco L1, L2 interfaces between Fabric Interconnects

Correct Answer: AD

QUESTION 2
You are developing a FlexPod solution with a MetroCluster IP as the storage solution.
In this scenario, which two components are supported? (Choose two.)

A. NetApp AFF C190
B. Cisco Nexus 3524-X/XL
C. Cisco Nexus 3232C
D. NetApp AFF A400

Correct Answer: C,D

QUESTION 3
You are asked to evaluate SaaS-based monitoring solutions for your FlexPod environment. Other than being
SaaS-delivered, selection criteria include full lifecycle management, environment automation, and the ability to
monitor third-party storage that is salted for retirement.
In this scenario, which product satisfies the requirements?

A. NetApp Cloud Insights
B. NetApp OnCommand Insight
C. Cisco UCS Manager
D. Cisco Intersight

Correct Answer: A

Examkingdom NetApp NS0-175 Exam pdf, Certkingdom NetApp NS0-175 PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-175 Certification, NetApp NS0-175 Training at certkingdom.com

NetApp

NS0-184 NetApp Certified Storage Installation Engineer, ONTAP Exam

Certification overview
NetApp Certified Storage Installation Engineer, ONTAP

You have proven skills in performing ONTAP® installation services, adhering to NetApp® quality standards, and using NetApp best practices.

NCSIE ONTAP logos and certificates will be granted to those individuals who successfully pass the NetApp Certified Storage Installation Engineer, ONTAP (NS0-184) exam.

Prepare for your exam
NS0-184 NetApp Certified Storage Installation Engineer, ONTAP (NCSIE ONTAP)

Candidates for the NetApp Certified Storage Installation Engineer, ONTAP certification should have at least 6 to 12 months of experience with NetApp® ONTAP® solutions, including setting up, configuring, installing, testing, and troubleshooting NetApp storage systems.

It is recommended (but not required) that NCSIE candidates first achieve the NetApp Certified Data Administrator (NCDA) certification.

Recommended Training and Resources:
ONTAP Cluster Administration (vILT/ILT)
Universal FAS Installation (WBT)
ONTAP Hardware Component Troubleshooting and Analysis
Practice Test for NS0-184
View Exam Topics
Reference Document (PDF)
Register for NS0-184

To enroll in NetApp University training, you will need a NetApp Support Site account.

Take your exam
The NetApp Certified Storage Installation Engineer, ONTAP exam includes 60 test questions, with an allotted time of 1-1/2 hours to complete. In countries where English is not the native language, candidates for whom English is not their first language will be granted a 30-minute extension to the allotted examination completion time.

Your results will be available in CertCenter two (2) to five (5) business days after you complete your exam.

The NCSIE ONTAP (NS0-184) exam includes the following topics:

Basic Installation Topics and Tools
Describe the required tools or documentation for preparing the installation of a new ONTAP cluster
Describe physical cabling of ONTAP nodes
ONTAP Concepts
Identify how to update ONTAP
Identify ONTAP cluster controller components
Describe how to create aggregates
Describe the required steps for installation or expansion of an ONTAP cluster
ONTAP Networking
Describe how to configure ONTAP system networking
Describe network types used with ONTAP clusters
ONTAP Switches
Describe cabling of a switched cluster
Identify the software needed for cluster switch configuration
ONTAP Configuration
Describe how to add or remove nodes in an ONTAP cluster
Describe how to set up cluster peering
Describe how to implement security hardening
Describe support resources required for troubleshooting ONTAP installations
Customer Handoff
Describe the tools available to review an installation
Describe the process for handover of new ONTAP cluster installation to the customer
Identify how to create documentation

QUESTION 1
You have a 2-node FAS8300 ONTAP 9.8 cluster that serves SMB shares. You are configuring interface
groups for higher performance and resiliency.
Which two NetApp best practices should you follow to satisfy these performance and resiliency requirements?
(Choose two.)

A. Use ports from different NICs.
B. Use ports from the same NICs.
C. Use ports with different chipsets.
D. Use ports with the same chipsets.

Answer: A,D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.netapp.com/media/19900-tr-4847.pdf (7)

QUESTION 2
You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and need to
obtain the preinstallation information from the customer.
In this scenario, what are three examples of data required from the customer? (Choose three.)

A. management IP addresses
B. cluster switch name
C. gateway IP address
D. BMC IP addresses
E. cluster name

Answer: A,B,D

QUESTION 3
After the successful installation of a NetApp ONTAP cluster, the customer wants to know how to view
telemetry data. The customer also wants to receive online information about any risks with the cluster and
potential best-practice gaps.
Which tool satisfies the customer’s requirements?

A. Active IQ Digital Advisor
B. Interoperability Matrix Tool
C. Spot by NetApp
D. Cloud Manager

Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https:://docs.netapp.com/us-en/ontap/pdfs/sidebar/Cluster_administration.pdf

Examkingdom NetApp NS0-184 Exam pdf, Certkingdom NetApp NS0-184 PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-184 Certification, NetApp NS0-184 Training at certkingdom.com

NetApp

NS0-003 NetApp Certified Technology Associate Exam Details

Exam Number NS0-003 Technology Associate
Exam Price $150 USD
Duration 90 minutes
Number of Questions 60
Passing Score 68%
Recommended Training Cloud Data Services Fundamentals
Exam Registration PEARSON VUE
Sample Questions NetApp NS0-003 Sample Questions
Practice Exam NetApp Certified Technology Associate Practice Test

NetApp certified technology associate
You demonstrate a foundational understanding of NetApp® data storage systems and the products and technologies specifically designed for managing data in today’s growing hybrid cloud market. You understand technologies in storage and data management, both on-premise and in a hybrid cloud environment and have an in-depth knowledge of NetApp products and technologies used in managing data in the cloud.

NCTA will be granted to those individuals who successfully pass the NetApp Certified Technology Associate (NS0-003) exam.

Prepare for Your Exam

NetApp Certified Technology Associate

Recommended Training and Resources:
Practice Exam for NS0-003
Reference Document (PDF)
Visit the NetApp Certified Technology Associate Learning Resources Portal
This new portal guides you to learning resources and presents learning opportunities for understanding technologies in storage and data management, both on-premise and in a hybrid cloud environment, as well as in-depth knowledge of NetApp products and technologies used in managing data in the cloud.

To enroll in NetApp Learning Services training, you will need a NetApp Support Site account.

A great way to start the NetApp Certified Technology Associate preparation is to begin by properly appreciating the role that syllabus and study guide play in the NetApp NS0-003 certification exam. This study guide is an instrument to get you on the same page with NetApp and understand the nature of the NetApp NCTA exam.

Our team of experts has composed this NetApp NS0-003 exam preparation guide to provide the overview about NetApp Technology Associate exam, study material, sample questions, practice exam and ways to interpret the exam objectives to help you assess your readiness for the NetApp Technology Associate exam by identifying prerequisite areas of knowledge. We recommend you to refer the simulation questions and practice test listed in this guide to determine what type of questions will be asked and the level of difficulty that could be tested in the NetApp NCTA certification exam.

Section Objectives

Infrastructure Concepts – Identify basic infrastructure concepts
– Identify data governance concepts
– Identify virtualization concepts

NetApp Data Storage Software
–Identify NetApp Element, NetApp ONTAP, NetApp StorageGRID, NetApp SANtricity

NetApp Cloud Solutions – Describe NetApp Cloud Manager tools
– Describe the NetApp data mobility solutions
– Identify NetApp cloud data protection
– Describe NetApp Cloud Storage
– Describe NetApp Cloud Services

NetApp Hybrid Cloud Value Proposition
Describe the business benefits of the NetApp Data Fabric
– Identify the consumption model options for NetApp Hybrid Cloud solutions

QUESTION 1
Regarding Quality of Service, what are three IOPS parameters in the NetApp Element software that are defined per volume? (Choose three.)

A. Standard IOPS
B. Extreme IOPS
C. Maximum IOPS
D. Minimum IOPS
E. Burst IOPS

Correct Answer: CDE

QUESTION 2
What provides dynamic storage orchestration services for Kubernetes workloads?

A. Ansible
B. SANtricity OS
C. Trident
D. ONTAP software

Correct Answer: C

QUESTION 3
Where would you create an export policy?

A. in a FlexVol volume
B. in a RAID group
C. in a Storage VM
D. in an aggregate

Correct Answer: C

Examkingdom NetApp NS0-003 Exam pdf, Certkingdom NetApp NS0-003 PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-003 Certification, NetApp NS0-003 Training at certkingdom.com

NetApp

NS0-162 NetApp Certified Data Administrator, ONTAP Exam

NetApp Certified Data Administrator, ONTAP
You have proven skills in performing in-depth support, administrative functions, and performance management for NetApp® data storage controllers running the ONTAP® operating system in NFS and Windows® (CIFS) multiprotocol environments. You understand how to implement high-availability controller configurations, and have detailed knowledge of technologies used to manage and protect mission-critical data.

NCDA logos and certificates will be granted to those individuals who successfully pass the NetApp Certified Data Administrator, ONTAP (NS0-162) exam.

Prepare for your exam
NS0-162 : NetApp Certified Data Administrator, ONTAP

Candidates for NCDA (NetApp Certified Data Administrator) certification should have at least six to 12 months of field experience implementing and administering NetApp® data storage solutions in multiprotocol environments. In addition, candidates taking the NetApp Certified Data Administrator, ONTAP exam should know how to implement HA controller configurations, SyncMirror® software for rapid data recovery, or ONTAP® solutions with either single- or multi-node configurations.

Recommended Training and Resources:
ONTAP Cluster Fundamentals (WBT)
ONTAP Cluster Administration (ILT)
ONTAP Data Protection Fundamentals (WBT)
NS0-162 Practice test
View Exam Topics
Reference Document (PDF)
Register for NS0-162

To enroll in NetApp University training, you will need a NetApp Support Site account.

Take your exam
The NetApp Certified Data Administrator, ONTAP (NS0-162) exam includes 60 test questions, with an allotted time of 1-1/2 hours to complete. In countries where English is not the native language, candidates for whom English is not their first language will be granted a 30-minute extension to the allotted examination completion time.

Your results will be available in CertCenter two (2) to five (5) business days after you complete your exam.

The NCDA ONTAP (NS0-162) exam includes the following topics:

Storage Platforms
Describe knowledge of physical storage systems.
Describe software-defined on-premises or cloud storage systems.
Describe how to upgrade or scale ONTAP clusters.

Core ONTAP
Describe ONTAP system management.
Describe high availability concepts.
Describe how to manage Storage Virtual Machines (SVM).

Logical Storage
Describe how to use logical storage features.
Describe NetApp storage efficiency features.
Describe NetApp ONTAP Data Fabric solutions.

Networking
Describe how to use network components.
Demonstrate knowledge of how to troubleshoot network components.

SAN Solutions and Connectivity
Describe how to use SAN solutions.
Demonstrate knowledge of how to troubleshoot SAN solutions.

NAS Solutions
Describe how to use NAS solutions.
Demonstrate knowledge of how to troubleshoot NAS solutions.

Data Protection
Describe how to use ONTAP data protection solutions.
Describe how to use SnapMirror.
Identify MetroCluster concepts.

Security
Describe protocol security.
Describe security hardening.
Describe inflight or at rest encryption.
Identify SnapLock concepts.

Performance
Demonstrate knowledge of how to administer ONTAP performance.
Demonstrate knowledge of how to troubleshoot storage system performance.

QUESTION 1
You are the administrator of an ONTAP 9.8 cluster. You have configured an hourly snapshot schedule for all
NAS volumes. One of your users accidentally deleted an important spreadsheet file on an SMB share. The file
needs to be restored as quickly as possible by the Windows user.
Which statement is correct in this scenario?

A. In Windows Explorer, right-click on the SMB share where the file was deleted, go to previous versions select the file and copy it to the original location.
B. On the cluster CLI, execute the volume snapshot restore-file command with the options to select the SnapShot, path, and restore-path.
C. On the cluster CLI, execute the volume clone create command with the –parent-snapshot option set to the latest Snapshot copy and share the cloned volume as an SMB share, then copy the file back.
D. In ONTAP System Manager, navigate to the volume where the share resides, click on SnapShot copies and restore the latest SnapShot copy.

Correct Answer: A

QUESTION 2
After creating several volumes, you notice that the hosting aggregates immediately show a decrease in available space.
Which volume setting would prevent this outcome?

A. space guarantee set to “volume”
B. space SLO set to “semi-thick”
C. space guarantee set to “none”
D. space SLO set to “thick”

Correct Answer: B

QUESTION 3
You want to prepare your ONTAP cluster and your ESXi cluster to connect NFS datastores over a 10-GbE network using jumbo frames.
In this scenario, which three configurations would accomplish this task? (Choose three.)

A. Enable jumbo frames with an MTU of 1500 for your ESXi hosts
B. Enable jumbo frames with an MTU of 9000 for your ONTAP cluster
C. Enable jumbo frames with an MTU of 1500 for your ONTAP cluster
D. Enable jumbo frames with an MTU of 9000 for your ESXi hosts
E. Enable jumbo frames with an MTU of 9216 for your switches

Correct Answer: BDE

Examkingdom NetApp NS0-162 Exam pdf, Certkingdom NetApp NS0-162 PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-162 Certification, NetApp NS0-162 Training at certkingdom.com

NetApp

NS0-194 NetApp Certified Support Engineer (NCSE) Exam

A great way to start the NetApp Certified Support Engineer (NCSE) preparation is to begin by properly appreciating the role that syllabus and study guide play in the NetApp NS0-194 certification exam. This study guide is an instrument to get you on the same page with NetApp and understand the nature of the NetApp NCSE exam.

Our team of experts has composed this NetApp NS0-194 exam preparation guide to provide the overview about NetApp Support Engineer exam, study material, sample questions, practice exam and ways to interpret the exam objectives to help you assess your readiness for the NetApp NCSE exam by identifying prerequisite areas of knowledge. We recommend you to refer the simulation questions and practice test listed in this guide to determine what type of questions will be asked and the level of difficulty that could be tested in the NetApp NCSE certification exam.

Certification overview
NetApp Certified Support Engineer

You have proven support skills with NetApp ONTAP and have experience supporting NetApp storage solutions. You are also able to perform general troubleshooting, root cause analysis, hardware replacement, system configuration, and software and firmware upgrades for NetApp storage solutions.

NCSE logos and certificates will be granted to those individuals who successfully pass the NetApp Certified Support Engineer (NS0-194) exam.

Prepare for your exam
NS0-194

NetApp Certified Support Engineer
Candidates for NetApp Certified Support Engineer (NCSE) certification should have at least 6 to 12 months of experience with NetApp® solutions and technology, including on-site and remote support, general troubleshooting and root cause isolation, hardware replacement, documentation, node configuration, and software and firmware upgrades.

Recommended training and resources:
ONTAP Cluster Fundamentals (WBT)
ONTAP SAN Fundamentals (WBT)
ONTAP Data Protection Fundamentals (WBT)
ONTAP NAS Fundamentals (WBT)
Introduction to NetApp Storage System Basic Components (WBT)
Introduction to Clustered Data ONTAP Architecture (WBT)
Introduction to Aggregates and FlexVols in Clustered Data ONTAP (WBT)
Introduction to Networking in Clustered Data ONTAP (WBT)
Introduction to High-Availability in Clustered Data ONTAP (WBT)
Introduction to Data Protection in Clustered Data ONTAP (WBT)
Introduction to NFS in Clustered Data ONTAP (WBT)
Introduction to CIFS in Clustered Data ONTAP (WBT)
Introduction to WAFL and Snapshot in Clustered Data ONTAP (WBT)
Introduction to SAN in Clustered Data ONTAP (WBT)
Introduction to Storage System Monitoring and Manageability (WBT)
Introduction to Quotas in Clustered Data ONTAP (WBT)
Introduction to Clustered Data ONTAP Basic Troubleshooting (WBT)
Introduction to Name Services in Clustered Data ONTAP (WBT)
Introduction to Multi-Protocol Troubleshooting in Clustered Data ONTAP (WBT)
Introduction to Virtualization in ONTAP (WBT)
Introduction to Performance in ONTAP (WBT)
ONTAP Data Protection Administration (ILT)
ONTAP Troubleshooting (ILT)
ONTAP Cluster Administration (ILT)
NetApp Cloud Data Services Fundamentals
ONTAP Data Management Fundamentals

NS0-194 Practice test
To enroll in NetApp University training, you will need a NetApp Support Site account.

Take your exam
The NS0-194 exam includes 60 test questions, with an allotted time of 1-1/2 hours to complete. In countries where English is not the native language, candidates for whom English is not their first language will be granted a 30-minute extension to the allotted examination completion time.

Your results will be available in CertCenter two (2) to five (5) business days after you complete your exam.

The NCSE ONTAP (NS0-194) exam includes the following topics:

ONTAP OS
Describe disk or aggregate concepts
Describe volume concepts
Describe ONTAP networking concepts
Describe how ONTAP interacts with external components
Identify ONTAP logging mechanisms
Describe supported ONTAP protocols

Troubleshooting NetApp hardware and software
Demonstrate knowledge of how to collect and analyze information
Demonstrate knowledge of how to troubleshoot data access problems
Demonstrate knowledge of how to analyze performance

NetApp hardware
Identify the FRUs in a NetApp system
Demonstrate knowledge of the hardware replacement process
Describe storage hardware technology
Describe compute technology

NetApp cloud data services
Identify the components of cloud data services
Identify the components of a hybrid cloud solution

Data protection
Identify data protection concepts
Demonstrate knowledge of data protection operations

Active IQ
Describe how to use Active IQ

QUESTION 1
For security reasons, you must track the access of files of a specific folder.
In this scenario, what should you do to accomplish this task from the storage side?

A. Implement a Vscan solution.
B. Use a cron job to save the audit log.
C. Use role-based access control to track access.
D. Implement an FPolicy solution.

Correct Answer: D

QUESTION 2
You need to provide a customer an action plan to update an ONTAP system after a security bulletin has been issued.
In this scenario, how do you accomplish this task?

A. Use the Interoperability Matrix Tool.
B. Review the ONTAP 9 product page.
C. Download the target version and do a pre-check.
D. Use Upgrade Advisor on Active IQ.

Correct Answer: C

QUESTION 3
What is the minimum number of compute nodes required to run the NetApp Deployment Engine for NetApp HCI?

A. 2
B. 1
C. 3
D. 4

Correct Answer: A

QUESTION 4
Which NetApp technology enables you to perform block-based replication from NetApp Element software to
Cloud Volumes ONTAP?

A. SyncMirror
B. SnapMirror
C. Cloud Sync
D. MetroCluster

Correct Answer: B
 

Actualkey NetApp NS0-194 Exam pdf, Certkingdom NetApp NS0-194 PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-194 Certification, NetApp NS0-194 Training at certkingdom.com

NetApp

NS0-183 NetApp Certified Storage Installation Engineer – ONTAP (NCSIE ONTAP) Exam

NetApp Certified Storage Installation Engineer, ONTAP
Take the first step to earn your certification today

Certification overview
NetApp Certified Storage Installation Engineer, ONTAP

You have proven skills in performing ONTAP® installation services, adhering to NetApp® quality standards, and using NetApp best practices.

NCSIE ONTAP logos and certificates will be granted to those individuals who successfully pass the NetApp Certified Storage Installation Engineer, ONTAP (NS0-183) exam.

NetApp Certified Storage Installation Engineer, ONTAP (NCSIE ONTAP)

Candidates for the NetApp Certified Storage Installation Engineer, ONTAP certification should have at least 6 to 12 months of experience with NetApp® ONTAP® solutions, including setting up, configuring, installing, testing, and troubleshooting NetApp storage systems.

It is recommended (but not required) that NCSIE candidates first achieve the NetApp Certified Data Administrator (NCDA) certification.

Recommended Training and Resources:
ONTAP Clustered Installation Workshop (ILT)
ONTAP Cluster Administration (vILT/ILT)
Universal FAS Installation (WBT)
Introduction to NetApp Installation Standard (WBT)
Practice Test for NS0-183
View Exam Topics
Reference Document (PDF)
Register for NS0-183
To enroll in NetApp University training, you will need a NetApp Support Site account.

Take your exam
The NetApp Certified Storage Installation Engineer, ONTAP exam includes 60 test questions, with an allotted time of 1-1/2 hours to complete. In countries where English is not the native language, candidates for whom English is not their first language will be granted a 30-minute extension to the allotted examination completion time.

Your results will be available in CertCenter two (2) to five (5) business days after you complete your exam.

The NCSIE ONTAP (NS0-183) exam includes the following topics:
Basic Installation Topics and Tools
Describe installation preparation steps
Describe basic equipment installation steps
ONTAP Concepts
Identify general cluster terms used during installation
Identify ONTAP licensing for 9.7
ONTAP Networking
Describe the cluster network, e.g., multi-node, single node clusters
Demonstrate knowledge of the purpose of the management network
Identify the networking components in a cluster environment
ONTAP Switches
Identify the functions of supported switches
Demonstrate knowledge of how to configure/verify configuration requirements
ONTAP Configuration
Describe how to use NetApp configurations
Demonstrate knowledge of how a node should be added or replaced
Customer Handoff
Describe how to complete the service report
Demonstrate knowledge of handoff procedures to the customer
Demonstrate knowledge of how to communicate completion and possible problem status
Identify contacts for additional help after handoff

QUESTION 1
What should you do to change the data protocol of a LIF?

A. Delete and re-recreate the LIF.
B. Add the new data protocol to the LIF.
C. Put the LIF in another broadcast domain.
D. Shut down the assigned port.

Correct Answer: A

QUESTION 2
You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives.
Your customer wants to use the cluster exclusively with FlexGroups.
In this scenario, which two statements are correct? (Choose two.)

A. All NL-SAS drives are assigned only to one of the nodes.
B. A NAS protocol is licensed on both nodes.
C. A SAN protocol is licensed on both nodes.
D. All NL-SAS drives are divided evenly across both nodes.

Correct Answer: B,D

QUESTION 3
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP
cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?

A. Active IQ scheduled reports
B. NetAppDocs output report
C. ONTAP System Manager
D. Active IQ Config Advisor worksheet

Correct Answer: A

QUESTION 4
What is the default shelf ID for disk shelves with IOM12 modules?

A. 12
B. 01
C. 10
D. 00

Correct Answer: D

Actualkey NetApp NS0-183 Exam pdf, Certkingdom NetApp NS0-183 PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-183 Certification, NetApp NS0-183 Training at certkingdom.com

NetApp

NS0-402 NetApp Certified Hybrid Cloud Implementation Engineer Exam

NetApp Certified Hybrid Cloud Implementation Engineer
NetApp Certified Hybrid Cloud Implementation Engineers have the skills and ability to implement and automate NetApp Hybrid Cloud solutions from private and public cloud configurations to monitoring and troubleshooting.

NCHC Implementation Engineer logos and certificates will be granted to those individuals who successfully pass the NetApp Certified Hybrid Cloud Implementation Engineer (NS0-402) exam.

Prepare for your exam
Candidates for NetApp Certified Hybrid Cloud Implementation Engineer certification should have at least 6-12 months of field experience.

Recommended Preparation
NS0-402 Practice Test
Reference Document
Azure Fundamentals
Cloud Volumes ONTAP Deployment and Management for Azure
AWS Fundamentals
Cloud Volumes ONTAP Deployment and Management for AWS
GCP Fundamentals
NetApp HCI Installation & Configuration
Integrating Hybrid Clouds with NetApp Data Fabric
Using Cloud Insights
Docker for Beginners
Fundamentals of Containers, Kubernetes, and Red Hat OpenShift
DevOps Materials

Additional Links:
Git Theory
Git Practice
Ansible Resources: Get Started; User Guide; netapp.io

Take your exam
The NetApp Certified Hybrid Cloud Implementation Engineer exam (NS0-402) includes 60 test questions, with an allotted time of 1-1/2 hours to complete. In countries where English is not the native language, candidates for whom English is not their first language will be granted a 30-minute extension to the allotted examination completion time.

Your results will be available in CertCenter two (2) to five (5) business days after you complete your exam.

The NS0-402 Exam Includes the Following Topics:

DevOps Concepts
Describe version control processes for code
Describe the differences in DevOps versus traditional system administration
Describe NetApp Hybrid Cloud capabilities within the software development lifecycle

Scalable Hybrid Cloud Deployment
Demonstrate knowledge of security or compliance deployment capabilities in a NetApp Hybrid Cloud
Demonstrate knowledge of high availability or fault tolerance capabilities in the NetApp Hybrid Cloud
Demonstrate knowledge of end-to-end deployment of hybrid cloud solutions
Demonstrate knowledge of deploying a NetApp private cloud

Hybrid Cloud Infrastructure Automation
Describe the types of automation methods
Demonstrate knowledge of using configuration files
Demonstrate knowledge of how to use Ansible for NetApp deployment

Persistent Storage for Containers
Demonstrate knowledge of when to use persistent storage with containers
Describe how to implement automated persistent storage using Trident

Hybrid Cloud Infrastructure Monitoring and Remediation
Demonstrate knowledge of how to monitor hybrid cloud solutions
Demonstrate knowledge of hybrid cloud problem remediation

QUESTION 1
You want to integrate data cloning with the rest of the infrastructure deployment to create a test environment.
In this scenario, which automation mechanism would be incorporated for your cloud-based testing?

A. Ansible playbook using REST API calls for different tasks
B. Ansible playbook using ZAPI calls for different tasks
C. cloning the environment from within System Manager
D. SOAP calls from a client tool

Correct Answer: A

QUESTION 2
You have deployed your application to an NKS cluster in your on-premises environment with ONTAP Select.
You now want to move your application to an AWS environment.
What are two ways to accomplish this task? (Choose two.)

A. Use CloudMirror.
B. Use Cloud Sync.
C. Use SnapSync.
D. Use SnapMirror.

Correct Answer: B,D

QUESTION 3
Your company asks you to deploy a new version control management system.
In this scenario, which two tools would accomplish this task? (Choose two.)

A. Confluence
B. GitHub
C. ALM
D. SourceForge

Correct Answer: A,B

QUESTION 4
A customer has a legal requirement to hold data that has a 30-year retention period. The data cannot be
modified when it is under hold. If the legal hold for any of the data ends, that data must be removed.
In this scenario, what are two solutions that satisfy the customer’s requirements? (Choose two.)

A. SnapLock Compliance enabled aggregate
B. SnapLock Enterprise enabled aggregate
C. Cloud Volumes ONTAP in GovCloud
D. NetApp Cloud Volumes ONTAP with WORM enabled

Correct Answer: A,D

Actualkey NetApp NS0-402 Exam pdf, Certkingdom NetApp NS0-402 PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-402 Certification, NetApp NS0-402 Training at certkingdom.com

NetApp

NS0-302 NetApp Certified Hybrid Cloud Administrator Exam

A great way to start the NetApp Certified Hybrid Cloud Administrator (NCHCAD) preparation is to begin by properly appreciating the role that syllabus and study guide play in the NetApp NS0-302 certification exam. This study guide is an instrument to get you on the same page with NetApp and understand the nature of the NetApp NCHC Administrator exam.

Our team of experts has composed this NetApp NS0-302 exam preparation guide to provide the overview about NetApp Hybrid Cloud Administrator exam, study material, sample questions, practice exam and ways to interpret the exam objectives to help you assess your readiness for the NetApp NCHCAD exam by identifying prerequisite areas of knowledge. We recommend you to refer the simulation questions and practice test listed in this guide to determine what type of questions will be asked and the level of difficulty that could be tested in the NetApp NCHC Administrator certification exam.

NetApp NS0-302 Exam Overview:

Exam Name Hybrid Cloud Administrator
Exam Number NS0-302 NCHCAD
Exam Price $150 USD
Duration 90 minutes
Number of Questions 60
Passing Score 70%

Recommended Training Technical Overview of SaaS Backup for Microsoft Office 365 (WBT)
NetApp Cloud Volumes ONTAP: Deployment and Management for Azure (WBT)
Cloud Data Services Fundamentals
StorageGRID Webscale Fundamentals
Exam Registration PEARSON VUE
Sample Questions NetApp NS0-302 Sample Questions
Practice Exam NetApp Certified Hybrid Cloud Administrator Practice Test
NetApp NS0-302 Exam Topics:

Section Objectives
Cloud Manager Administration – Demonstrate knowledge of how to deploy OnCommand Cloud Manager
– Demonstrate knowledge of how to administer an OnCommand Cloud Manager
– Demonstrate knowledge of how to troubleshoot OnCommand Cloud Manager

Cloud Volumes ONTAP Administration – Describe how to provision storage
– Describe how to decommission or pause Cloud Volumes ONTAP
– Describe storage efficiency or provisioning tools available in ONTAP cloud
– Describe how to deploy Cloud Volumes ONTAP in all supported cloud providers
– Describe how to set up a failover scenario between Cloud Volumes ONTAP in two regions of a cloud provider
– Describe how to upgrade Cloud Volumes ONTAP
– Describe which protocols are supported by Cloud Volumes ONTAP

Cloud Volumes Services Administration – Describe how to deploy cloud volumes in supported hyperscalers
– Describe which protocols are supported by Cloud Volumes Service

Cloud Connected Platforms – Demonstrate knowledge of how to set up a FabricPool to connect to an existing cloud storage location
– Demonstrate knowledge of how to provision services in cloud connected storage
– Demonstrate knowledge of how to create a StorageGRID S3 bucket

Cloud Data Security – Describe how to provision security permissions in a public cloud provider to set up Cloud Volumes ONTAP
– Describe how to provision security permission in a public cloud provider to set up Cloud Volumes Services

Data Protection – Describe how to protect or restore data in SaaS Backup
– Describe how to configure data protection
– Demonstrate knowledge of how to troubleshoot data protection services
– Describe NetApp Data Availability Services (NDAS) concepts

Public Cloud Prerequisites – Describe how to set up networking in a hybrid cloud environment
– Describe how to set up data service levels in a NetApp hybrid cloud solution

NetApp NCHCAD Exam Description:
The NetApp Certified Hybrid Cloud Administrator (NS0-302 exam) includes 60 test questions, with an allotted time of 1-1/2 hours to complete. In countries where English is not the native language, candidates for whom English is not their first language will be granted a 30-minute extension to the allotted examination completion time.

QUESTION 1
Which two protocols does a Cloud Volumes Service dual-protocol share support? (Choose two.)

A. SMB
B. iSCSI
C. NFS
D. FC

Correct Answer: AC

QUESTION 2
You are your company’s public cloud administrator and you must deploy Cloud Volumes ONTAP for your
unstructured data. You want to use S3 storage for your replicated data. You are going to use data tiering to move this data to S3.
In this scenario, which tiering policy would you use?

A. backup
B. snapshot-only
C. none
D. auto

Correct Answer: B

QUESTION 3
You have an NFS export in Cloud Volumes Service, but have an application requirement for block access and
SCSI-2 reservations. You need to migrate the data to a new iSCSI LUN presented to a Linux server from
Cloud Volumes ONTAP. The Linux server is also running an NFS server.
In this scenario, which tool would you use to perform this task?

A. CloudMirror
B. Cloud Sync
C. Robocopy
D. SnapMirror

Correct Answer: B

QUESTION 4
Your company has purchased a NetApp HCI. You are asked to deploy HA file services out of the NetApp HCI system.
Which two actions accomplish this task? (Choose two.)

A. Use ONTAP Select Deploy.
B. Provide an ONTAP Select license file.
C. Provide an ONTAP cluster base license key.
D. Select “Yes, I want to enable File Services” on the NetApp Deployment Engine.

Correct Answer: AB

Actualkey NetApp NS0-302 Exam pdf, Certkingdom NetApp NS0-302 PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-302 Certification, NetApp NS0-302 Training at certkingdom.com

NetApp

NS0-173 Cisco and NetApp FlexPod Design Specialist Exam

NS0-173 Cisco and NetApp FlexPod Design Specialist Exam

Cisco and NetApp flexPod certification
You are proficient in designing and installing FlexPod® solutions for a variety of business workloads. FlexPod solutions speed the deployment of infrastructure and business-critical applications while reducing cost, complexity, and risk.

NetApp offers two Cisco® and NetApp® FlexPod certifications: FlexPod Design Specialist and FlexPod Implementation and Administration Specialist.

FlexPod logos and certificates will be granted to those individuals who successfully pass either of the following:

Cisco and NetApp FlexPod Design (NS0-173) certification exam.
Cisco and NetApp FlexPod Implementation and Administration (NS0-174) certification exam.

These exams are available in both English and Simplified Chinese.

Take your exam
NS0-173 exam includes 60 test questions, with an allotted time of 60 minutes to complete. In countries where English is not the native language, candidates for whom English is not their first language will be granted a 30-minute extension to the allotted examination completion time.

This exam is available in both English and Simplified Chinese.

The NS0-173 exam covers the following topics:

Compute
Hardware components
Configuration
High availability
SAN Boot
UCS Manager

Networking
Hardware components
Configuration
High availability
SAN Boot

Storage
Hardware components
Configuration
High availability
SAN Boot

Virtualization
Hypervisor Solutions
SAN Boot

Design, Management, and Orchestration Tools

QUESTION 1
Your customer has a FlexPod configuration with a 4-node NetApp AFF A300 storage cluster that uses only NSE drives.
Which two solutions allow the customer to expand the current storage system? (Choose two.)

A. a two-node AFF A200 with a 3.8 TB NSE SSD
B. a DS224C with twenty-four 3.8 TB SSDs
C. a DS4246 with twenty-four 6 TB NL-SAS HDDs
D. a two-node FAS8200 with a 4 TB NL-SAS HDD

Correct Answer: BD

QUESTION 2
A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using
the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?

A. trunk mode
B. end host mode
C. switching mode
D. access mode

Correct Answer: C

QUESTION 3
The storage administrator must change the vHBA settings bound to a template associated with a production server.
What happens when the settings are reconfigured in this scenario?

A. The vHBA configuration change does not affect LUN access.
B. The server that is associated with the service profile reboots.
C. The service profile template that is associated with the server is initialized.
D. The vHBA template is deleted from UCS Manager.

Correct Answer: C

QUESTION 4
A customer has installed FlexPod and verified that all wiring connections are correct. However, the customer
cannot see any FC LUNs from the NetApp AFF systems.
In this scenario, which three configuration elements should the customer verify? (Choose three.)

A. FC zoning
B. igroup configuration
C. ALUA settings
D. FC portsets
E. MTU configuration

Correct Answer: BDE

Actualkey NetApp NS0-173 Exam pdf, Certkingdom NetApp NS0-173 PDF

MCTS Training, MCITP Trainnig

Best NetApp NS0-173 Certification, NetApp NS0-173 Training at certkingdom.com